污网站在线观看视频,久视频久免费视频久免费,国产福利在线免费观看,一区二区三区乱码在线 | 中文

Technical Data Sheet
BONDERITE C-AK 4181 L AERO
May-2018
PRODUCTDESCRIPTION
BONDERITE C-AK 4181 L AERO provides the following
product characteristics:
Technology
Product Type
Application
Metal Pretreatment
Alkaline Cleaner
Immersion Process
BONDERITE C-AK 4181 L AERO is a liquid, strongly
alkaline immersion cleaner to rapidly and economically
remove strong rust and other corrosion deposits, heat
deposits, colour as well as grease and dirt deposits in a
single work step.
With this product, a liquid alternative to the proven powder
product BONDERITE C-AK ARR-4181 AERO is available
now.
Storage and handling are considerably simplified within the
meaning of occupational health and safety.
BONDERITE C-AK 4181 L AERO can be used in a normal
immersion bath, electrolytic and ultrasonic process.
It leaves a perfect surface. Steel components do not
discolour. The base metal is not attacked. Components
made from copper, brass and their alloys are slightly etched.
All surfaces are left with a clean and shiny appearance.
BONDERITE C-AK 4181 L AERO prevents quick rusting
after treatment. Hydrogen embrittlement does no occur when
applied to iron or steel.
TECHNICAL DATA
Composition
Appearance
sodium hydroxide, caustic alkalis,
salts, organic acids , surfactants
slightly turbid liquid with light
sediment at room temperature
Density (20°C), g/mL 1.3
Flash Point:
not applicable
pH:
Specifications:
>13
AMS-1379
CCT-APPROVED(Dec1993)
CCT-LB540
CFM-CP2054
CFM-CP2562
CFM-Temp 970318
CMM189120
DMR-70-256
GE-C04-009 (70-80-30)
GE-C04-182
IAE-01-417
PW-SPMC 116 (SPOP 18, 203, 211, 212, 213, 216, 221,
222, 258)
PW-SPMC129
RR-OMAT1/173N
RR-OMAT173C
ASTMF-945
DIRECTIONS FOR USE
Preliminary Statement:
Prior to use it is necessary to read the Material Safety Data
Sheet for information about precautionary measures and
safety recommendations. Also, for chemical products
exempt from compulsory labeling, the relevant precautions
should always be observed. Please also refer to the local
safety instructions and contact Henkel for analytical support.
Application:
BONDERITE C-AK 4181 L AERO is suited for being used on
cast steel, steel, iron, stainless steel, titanium, cadmium,
magnesium and copper with its alloys.
Surfaces of copper, brass and similar alloys are slightly
etched.
BONDERITE C-AK 4181 L AERO removes rust and
corrosion deposits, hand perspiration, oil carbon build-up,
light heat deposits, cooling lubricants, etc.
BONDERITE C-AK 4181 L AERO is suited, without
limitation, for use in the following industries: automotive and
aircraft industries, oil refineries, railway and transport
companies, maritime and river navigation, metal processing
industry, for mould cleaning in the glass, rubber and plastics
industry.
The Process:
BONDERITE C-AK 4181 L AERO is used in the immersion
process diluted up to about 10% in water.
The undiluted base corresponds to a 36.5% aqueous
solution of the respective powder product BONDERITE C-AK
ARR-4181 AERO.
Water to the bath may under no circumstances be added to
the hot bath when this is idle.
Otherwise, layers may be formed in the bath and the bath
contents may suddenly spurt out when such layers mix.
Water must always be added slowly to the well moving bath,
preferably to the cold bath.
Circulation of the bath liquid or the use of ultrasound
increases the efficiency and reduces the immersion time.
However, bath-air movement should be avoided to prevent
carbon oxide being absorbed from the air.
BONDERITE C-AK 4181 L AERO is used in the
concentrations listed below:
TDSBONDERITEC-AK 4181 L AERO, May-2018
Steel
Copper
and
brass
Magnesium Titanium
ADDITIONAL INFORMATION
Disclaimer
Concentration
~750 g ~450g
Temperature, °C 80 to 90 80 to 90
15 to 120 10 to 20
Immersion
time, min
Rinsing
~90 g
80 to 90
10 to 20
~180 g/L water
70 to 80
10 to 20
with cold or warm water, preferably under pressure
Passivation
Equipment:
BONDERITES-PR R-BLOL
Mild steel is sufficient as the container material, however,
stainless steel is preferred.
Heating coils from corrosion-resistant steel.
For the electrolytic process: Generator or rectifier 6-12 V.
Classification:
Please refer to the corresponding Material Safety Data
Sheets for details on:
Hazards identification
Transport information
Regulatory information
Storage:
Temperature, °C
Shelf-life, months
(in unopened original packaging)
5 to 50
24

產品名稱： 清洗系列 產品分類： P3 清洗系列
詳細說明： 1.應用于鋁合金陽極氧化產品
產品名 描述 使用方式 濃度 溫度 時間 備注
P3®；Almeco 46 長壽堿蝕添加劑 3-5%
P3®；Almeco 53 長壽堿蝕添加劑 3-5%
P3®；Almecolor ST 6 著色穩定劑（亞錫） 2-4%
P3®；Almeco TG 金黃色著色穩定劑 2-3%   60-70℃ 2-5分鐘
P3®；-Almeco S

聯系方式

公司名稱 上海行樸實業有限公司

聯系賣家 周小明 （QQ：497488033）

電話 잲잴-재잭잵-잰잳잳재잵잳잳잯

手機 잵잰잴잴잵잲잮잰재잵잰

傳真 잲잴-재잭잵-잰잳잳재잵잳잳잯

網址 http://www.shsenhao.com.cn

地址 上海市金山區