National Instruments PXI-2548 PXI射頻繼電器模塊
National Instruments PXI-2548 PXI射頻繼電器模塊
National Instruments PXI-2548 PXI射頻繼電器模塊
National Instruments PXI-2548 PXI射頻繼電器模塊
National Instruments PXI-2548 PXI射頻繼電器模塊
National Instruments PXI-2548 PXI射頻繼電器模塊
National Instruments PXI-2548 PXI射頻繼電器模塊
National Instruments PXI-2548 PXI射頻繼電器模塊
National Instruments PXI-2548 PXI射頻繼電器模塊

National-Instruments-PXI-2548-PXI射頻繼電器模塊

價格

訂貨量(個)

¥4500.00

≥2

聯系人 張先生 銷售經理

掃一掃添加商家

㠗㠙㠙㠛㠓㠘㠖㠘㠙㠖㠔

發貨地 福建省廈門市
進入商鋪
掃碼查看

掃碼查看

手機掃碼 快速查看

在線客服

廈門雄霸電子商務有限公司

店齡4年 企業認證

聯系人

張先生 銷售經理

聯系電話

㠗㠙㠙㠛㠓㠘㠖㠘㠙㠖㠔

經營模式

經營批發

所在地區

福建省廈門市

進入店鋪
收藏本店

如果這是您的商鋪,請聯系我們

商品參數
|
商品介紹
|
聯系方式
品牌 National Instruments
系列 PXI系列
型號 PXI-2548
類型 模塊/機架/底盤
時間 4小時制
功耗 每個插槽7W
規格 9.8英寸乘7.7英寸乘7.0英寸
重量 8磅
通道 16通道
交流電壓 100-240V
商品介紹

PXI國家儀器公司-2548(零件號:778572-48)是一個通用交換模塊有單刀雙擲獨立繼電器(SPDT)。這PXI-2548 開關模塊通過控制一系列繼電器來改變每個通道上的電阻,從而再現基于電阻的裝置的行為。該器件能夠快速、精確地波動電阻,分辨率低至0.25ω,非常適合硬件在環(HIL)認證中重現環境條件。每個PXI可編程電阻模塊都利用前面板上的37針D-SUB連接器來訪問所有通道,此外還有一個2x2微型連接器,用于與PXI數字萬用表(DMM)簡單關聯。驅動軟件提供了一個基本的用戶界面,可以確認溫度或電阻單位的輸入,并配置每個通道的電阻,而不需要專門控制單個繼電器。

在……上倪PXI-2548可編程電阻是模擬基于電阻的信息源和輸出行為的測試模塊,包括:電位計、RTD、分壓器和電橋元件。每個通道上的總電阻(在前端連接器端子上估算)是通過利用繼電器操縱電路路徑電阻來控制的,繼電器通過分立的電阻專門布線。PXI可編程電阻模塊自動控制通過I/O連接器顯示的電阻估計值,支持在HIL認證中使用,在各種模擬框架條件下執行快速框架測試。

該型號提供2.7 GHz的帶寬、2.7 GHz %3C1.0 dB的插入損耗(典型值%3C0.7 dB)、2.7 GHz %3C1.7的VSWR(典型值%3C1.5)和板載繼電器計數。

The National Instruments PXI-2548 (Part number: 778572-48) is a General-Purpose Switching Module that has single-pole and double-throw, independent relays (SPDT). The NI PXI-2548 Switching Module reproduces the conduct of resistance‐based gadgets by controlling a progression of relays that varies resistance over each channel. The capacity to rapidly and precisely fluctuate resistance, with resolution down to 0.25 Ω, makes this gadget well‐suited for reenacting environmental conditions in hardware‐in‐the‐loop (HIL) approval. Each PXI Programmable Resistor Module utilizes a 37‐ pin D‐SUB connector on the front board to give access to all channels and additionally has a 2x2 Micro‐Fit connector for simple association with a PXI Digital Multimeter (DMM). The driver software gives a basic UI that acknowledges inputs to units of temperature or resistance and configures the resistance over each channel, without expecting to specifically control individual relays.

On the NI PXI-2548, programmable resistors are test modules that imitate the conduct of resistance-based information sources and outputs, including: potentiometers, RTDs, voltage dividers, and bridge elements. The total resistance over each channel, estimated over the front connector terminals, is controlled by manipulating the circuit path resistance by utilizing relays to specifically route through discrete resistors. PXI Programmable Resistor Modules automatically control the estimations of resistance showing up through an I/O connector, empowering utilization in HIL approval, which performs fast framework tests amid an assortment of simulated framework conditions.

This model offers 2.7 GHz of bandwidth, Insertion loss at 2.7 GHz <1.0 dB (typical <0.7 dB), VSWR at 2.7 GHz <1.7 (typical <1.5) and onboard relay counting.

聯系方式
公司名稱 廈門雄霸電子商務有限公司
聯系賣家 張先生 (QQ:1851269046)
手機 㠗㠙㠙㠛㠓㠘㠖㠘㠙㠖㠔
地址 福建省廈門市
聯系二維碼