污网站在线观看视频,久视频久免费视频久免费,国产福利在线免费观看,一区二区三区乱码在线 | 中文

水渠預制排水溝鋼模具需要按照正確的方法投入使用，因為只有這樣才能保證生產出來的水渠預制排水溝鋼模具在排水方面能夠擁有良好的使用效果。首先需要對生產好的模具進行檢查，看看是否其表面出現了生銹、老化等問題，如果出現了這種問題就不能接著進行使用了，而要對模具進行更換。檢查好之后就要在混凝土排水溝模具整體進行刷油工作，這樣可以在之后進行脫模的時候更加方便，刷完油之后就要往模具里面澆灌上大量的混凝土，因為該模具體積較大的原因，所以如果將其搬運到震動平臺上來震動的話是很困難的，這時候施工方就需要使用到震動棒來進行震動，將震動棒插入到混凝土里進行均勻震動，注意時間不能過短，保持在兩分鐘或者三分鐘這樣就很好，因為只有這樣才能夠使水渠預制排水溝鋼模具里面的氣泡及時快速的排出。震動完成之后就要等待模具里面的混凝土晾曬了，等模具里面的混凝土凝固好之后，就可以開始脫模了，到此一個成型的預制件就生產出來了。The steel mould for prefabricated drainage ditch of channel needs to be put into use according to the correct method, because only in this way can the produced steel mould for prefabricated drainage ditch of channel have good use effect in drainage. First of all, it is necessary to check the produced mold to see if there are rust, aging and other problems on its surface. If there are such problems, it can not be used again, but to replace the mold. After the inspection, it is necessary to brush oil on the whole concrete drainage ditch mold, which is more convenient for demoulding later. After the painting, a large amount of concrete should be poured into the mold. Because of the large volume of the mold, it is very difficult to transport it to the vibration platform for vibration. At this time, the construction party needs to use it The vibrating rod is used to vibrate. Insert the vibrating rod into the concrete to vibrate evenly. Pay attention that the time should not be too short. It is good to keep it for two or three minutes, because only in this way can the bubbles in the prefabricated drainage ditch steel mold be discharged in time and quickly. After the vibration is completed, wait for the concrete in the mold to dry. After the concrete in the mold has solidified, it can start demoulding, and then a formed prefabricated part is produced.