污网站在线观看视频,久视频久免费视频久免费,国产福利在线免费观看,一区二区三区乱码在线 | 中文

進口焊接閘閥廠家-德國洛克

進口焊接閘閥結構特點:

重量輕，本體采用*球黑鑄鐵制成，重量較傳統閘閥重量減輕約20%~30%，安裝維修方便。平底式閘座：傳統的閘閥往往在通水洗管后即因外物諸如石頭，木塊、水泥、鐵屑、雜物等淤積于閥底凹槽內，容易造成無法關閉緊密而形成漏水現象，彈性座封閘閥底部采用與水管機同的平底設計，不易造成雜物淤積，使流體暢通無阻。整體包膠：閘板采用高品質的橡膠進行整體內、外包膠，歐洲的橡膠硫化技術使得硫化后的閘板能夠保證精確的幾何尺寸，且橡膠與球墨鑄閘板接著牢靠，不易脫落及彈性記憶佳。水精鑄閥體：閥體采用精密鑄造，精確的幾何尺寸使得閥體內部無需任何精加工即可保證閥門的密封性。

進口焊接閘閥規格參數：

產品名稱：焊接閘閥

規格范圍：DN15-DN500

溫度范圍：-40℃≈580℃

壓力范圍：PN16-PN320

閥體材質：WCB、304、316、WC6、WC9

閥桿材質：304、316、WC6、WC9

閥蓋材質：與本體一樣

閥板材質：不銹鋼/合金鋼

連接方式：對焊式、插焊式

適用范圍：水、油品、蒸汽、及某些fu蝕性液體

進口焊接閘閥產品簡介：

德國洛克《DE LOCKE》進口焊接閘閥主要適用于公稱壓力PN10.0-40.0Mpa,工作溫度≤580℃的石油、化工、水力、火力電站各種系統的管路上,切斷或接通管路介質。適用介質為水、油品、蒸汽、及某些fu蝕性液體等。操作方式有手動、齒輪傳動、電動等。

Introduction of imported welded gate valve products:
German Rockwell "de Locke" imported welding gate valve is mainly used for cutting off or connecting pipeline medium in petroleum, chemical, hydraulic and thermal power plants with nominal pressure of pn10.0-40.0mpa and working temperature ≤ 580 ℃. The suitable medium is water, oil, steam and some Fu corrosive liquid. There are manual operation, gear transmission, electric and so on.

進口焊接閘閥工作原理：

閘閥是只能做全開或者全關的，不能作為調節流量的閥門使用。他的工作原理就是閘閥隨閘桿一起作上升或者下降做直線運動，閥桿上有梯形螺紋，通過閥門頂端的螺母以及閥體上的導槽，來實現閥桿的上下運動，閥桿帶動閘板運動。閘板的運動方向與管道流體介質方向是垂直的。

Working principle of imported welded gate valve:
Gate valve can only do full open or full close, can not be used as a flow control valve. His working principle is that the gate valve moves up or down along with the gate rod in a straight line. There are trapezoidal threads on the valve stem. Through the nut on the top of the valve and the guide groove on the valve body, the valve stem moves up and down, and the valve stem drives the gate plate to move. The movement direction of the ram is perpendicular to the fluid medium direction of the pipeline.

進口焊接閘閥安裝要點：

手輪、手柄及傳動機構均不允許作起吊用，并嚴禁碰撞。雙閘板閘閥應垂直安裝（即閥桿處于垂直位置 , 手輪在頂部 )。帶有旁通閥的閘閥在開啟前應先打開旁通閥（以平衡進出口的壓差及減小開啟力 )。帶傳動機構的閘閥，按產品使用說明書的規定安裝。如果閥門經常開關使用 , 每月至少潤滑一次。

Installation points of imported welded gate valve:
Hand wheel, handle and transmission mechanism are not allowed to be used for lifting, and collision is strictly prohibited. The double gate valve should be installed vertically (i.e. the stem is in the vertical position and the hand wheel is at the top). The gate valve with bypass valve should be opened before opening (to balance the pressure difference between the inlet and outlet and reduce the opening force). The gate valve with transmission mechanism shall be installed according to the product manual. If the valve is used frequently, lubricate it at least once a month.

進口焊接閘閥訂貨須知：

A、若訂貨前還未選定型號，請向我們提供您的使用參數:

1.公稱通徑 2.產品型號 3.流體性質（包括公稱壓力、溫度、介質） 4.閥體、密封材料 5.連接方式

B、若已經由設計單位選定我公司的產品型號，請按型號直接向我司銷售部訂購

C、當使用的場合非常重要或管路比較復雜時，請您盡量提供設計圖紙和詳細參

數，由我們德國洛克閥門技術員為您審核把關。

D、感謝您訪問我公司的網站〖〗，如有任何疑問.

您可以致電給我們《》我們一定會盡心盡力為您提供優質的服務!