污网站在线观看视频,久视频久免费视频久免费,国产福利在线免费观看,一区二区三区乱码在线 | 中文

進口氣體電磁閥德國洛克廠家直銷

 

進口氣體電磁閥優點：

德國《DE LOCKE》洛克進口氣體電磁閥零壓力亦能打開主閥,低壓差,流量大,適用范圍廣,閥芯密封能自動補償,提高閥的壽命與可靠性,特殊場合可持續長時間通電。

 

進口氣體電磁閥工作原理：

常閉：當線圈通電時，先導閥芯吸合，先導孔打開，閥上腔卸壓，活塞靠下腔介質壓力推動，電磁閥打開。

當線圈斷電時，先導閥芯靠彈簧復位，先導孔關閉，閥上腔由活塞節流孔增壓和復位彈簧的推力，電磁閥關閉。

常開：當線圈通電時，先導閥芯靠彈簧復位，先導孔關閉，閥上腔由活塞節流孔增壓和復位彈簧的推力，電磁閥關閉。

當線圈斷電時，先導閥芯靠彈簧復位，先導孔打開，閥上腔卸壓，活塞靠下腔介質壓力推動，電磁閥打開。

Working principle of imported gas solenoid valve:
Normally closed: when the coil is energized, the pilot valve core is closed, the pilot hole is opened, the pressure in the upper chamber of the valve is relieved, the piston is pushed by the medium pressure in the lower chamber, and the solenoid valve is opened.
When the coil is powered off, the pilot valve core is reset by the spring, the pilot hole is closed, the upper chamber of the valve is pressurized by the piston orifice and the thrust of the reset spring, and the solenoid valve is closed.
Normally open: when the coil is energized, the pilot valve core is reset by the spring, the pilot hole is closed, the upper chamber of the valve is pressurized by the piston orifice and the thrust of the reset spring, and the solenoid valve is closed.
When the coil is powered off, the pilot valve core is reset by the spring, the pilot hole is opened, the pressure in the upper chamber of the valve is relieved, the piston is pushed by the medium pressure in the lower chamber, and the solenoid valve is opened.
 

進口氣體電磁閥描述：

德國《DE LOCKE》洛克進口氣體電磁閥(Gas solenoid valve )是用電磁控制的工業設備，用在工業控制系流中調整介質的方向，流量，速度和其它的參數。電磁閥是用電磁閥的效應進行控制，主要的控制方式由繼電器控制。這樣電磁閥可以配合不同電路來實現預期的控制，而控制的精度和靈活性都能夠保證。電磁閥有很多種，不同的電磁閥在控制系統的不同位置發揮作 用，zui常用的是單向閥，安全閥，方向控制閥，速度調節閥等等。 

Description of the inlet gas solenoid valve:
Rock DE LOCKE imported Gas solenoid valve is an electromagnetic controlled industrial equipment that adjusts the direction, flow, speed and other parameters of the medium in the industrial control system. The solenoid valve is controlled by the effect of the solenoid valve, and the main control mode is controlled by the relay. In this way, the solenoid valve can be used with different circuits to achieve the desired control, and the control accuracy and flexibility can be guaranteed. There are many kinds of solenoid valves, different solenoid valves play a role in different positions of control system. Zui is usually used as one-way valve, safety valve, direction control valve, speed regulating valve, etc.
 

進口氣體電磁閥技術參數：

公稱通徑 DN10～50mm

原理結構 直動活塞式

環境溫度 -10～+50℃ -40～+80℃

線圈溫度 <+50℃、<+85℃

控制方式 常閉、常開、自保持

公稱壓力 0～1.6Mpa

閥體材質 鑄鋼、不銹鋼304、316

適用介質 氣、水、油、蒸汽、燃氣、腐蝕性流體

介質溫度 -5℃～180℃

介質粘度 小于50CSt （大于50時需定制）

防護性能 防水、防塵、防爆（Exd IICT5）、防腐

閥芯材質 均為不銹鋼

接線方式 接線座式、引線式、插頭式

電源電壓 DC12、DC24V、DC36V、DC110V、DC127V、DC220V、DC380V；

AC24V、AC36、AC110V、AC127V、AC220V、AC380V

連接方式 法蘭、內螺紋、外螺紋、卡套、焊接

泄 漏 量 零泄漏

備    注 特殊型可定制

Technical parameters of imported gas solenoid valve:
Nominal diameter dn10-50mm
Principle structure straight piston type
Ambient temperature -10 ~ +50 ℃ -40 ~ +80 ℃
Coil temperature ＜+50 ℃, < 85 ℃
Control mode: normally closed, normally open, self-sustaining
Nominal pressure 0-1.6mpa
Valve body material cast steel, stainless steel 304, 316
Suitable medium: gas, water, oil, steam, gas, corrosive fluid
Medium temperature -5 ℃ ~ 180 ℃
Medium viscosity less than 50cst (customized if it is greater than 50)
Protection performance: waterproof, dust proof, explosion-proof (Exd iict5), anti-corrosion
Valve core material is stainless steel
Wiring mode: terminal block type, lead type and plug type
Power supply voltage DC12, DC24V, DC36V, dc110v, dc127v, dc220v, dc380v;
                               AC24V、AC36、AC110V、AC127V、AC220V、AC380V
Connection mode flange, internal thread, external thread, ferrule, welding
Zero leakage
Note special type can be customized
 

進口氣體電磁閥訂貨須知：

A、若訂貨前還未選定型號，請向我們提供您的使用參數:

1.公稱通徑 2.產品型號 3.流體性質（包括公稱壓力、溫度、介質） 4.閥體、密封材料 5.連接方式

B、若已經由設計單位選定我公司的產品型號，請按型號直接向我司銷售部訂購

C、當使用的場合非常重要或管路比較復雜時，請您盡量提供設計圖紙和詳細參數，由我們德國洛克閥門技術員為您審核把關。

D、感謝您訪問我公司的網站〖〗，如有任何疑問.

您可以致電給我們《》我們一定會盡心盡力為您提供優質的服務!