進口隔膜泵德國洛克品牌精工細作
進口隔膜泵德國洛克品牌精工細作
進口隔膜泵德國洛克品牌精工細作
進口隔膜泵德國洛克品牌精工細作
進口隔膜泵德國洛克品牌精工細作
進口隔膜泵德國洛克品牌精工細作

進口隔膜泵德國洛克品牌精工細作

價格

訂貨量(臺)

¥5800.00

≥1

聯系人 葉工

㠗㠙㠚㠒㠕㠗㠚㠓㠘㠚㠓

發貨地 廣東省珠海市
進入商鋪
掃碼查看

掃碼查看

手機掃碼 快速查看

在線客服

商品參數
|
商品介紹
|
聯系方式
品牌 德國洛克
用途 輸送
型號 DE LOCKE
驅動方式 氣動、電動
介質溫度 -15~150℃℃
工作壓差 1.6mpa
適用介質
壓力環境 常壓
貨號 20204201
外型尺寸 中型
商品介紹

進口隔膜泵德國洛克品牌精工細作


進口隔膜泵 產品概述:

德國《DE LOCKE》洛克 進口隔膜泵是一種新型的泵類,近年來,由于在隔膜材質上取得了突破性的進展,國際上越來越多的工業化國家采用此種型式的泵,取代部份離心泵、螺桿泵,來應用于石化、陶瓷、冶金等行業,該泵適用于低壓,即出口壓力≤3kgf/cm2的場合。

 

進口隔膜泵 性能參數:

過流材質:304、304L、316、316L、不銹鋼                     

物料入口:DN25~100mm

膜片材質:F46、橡膠物料                                                   

物料出口:DN25~100mm

球體材質:不銹鋼304、316、316L、PTFE、橡膠             

*流量:3.5~20m3/h)

球座材質:不銹鋼304、316、316L、PTFE、橡膠             

*揚程:0~30m

功率范圍:1.5~5.5KW                                                         

吸升高度:干抽≤4.5m,濕抽≤6m

通過顆粒:2.5~10mm

 

進口隔膜泵 產品特點: 

●使用方便、工作可靠、開停只需簡單地打開和關閉氣體閥門,即使由于意外情況而長時間無介質運行或突然停機泵也不會因此而損壞,一旦超負荷,泵會自動地停機,具有自我保護性能,當負荷恢復正常后,又能自動啟動運行

●結構簡單、易損件少,該泵結構簡單,安裝、維修方便,泵輸送的介質不會接觸到配氣閥,聯桿等運動部件,不像其他類型的泵因轉子、活塞、齒輪、葉片等部件的磨損而使性能逐步下降

●可輸送較粘的液體(粘度在1萬厘泊以下)

●不需灌引水,吸程高達5米,揚程達70米,出口壓力≧7bar

●流動寬敞,通過性能好,允許通過顆粒直徑達10毫米。抽送泥漿、雜質時,對泵磨損甚微

●本泵無須用油潤滑,即使空轉,對泵也無任何影響

●不必用電,在易燃、易爆場所使用安全可靠

●可以浸沒在介質中工作

●揚程、流量可通過氣閥開度實現無級調節(氣壓調節在1-7bar之間)

●該泵無旋轉部件,沒有軸封,隔膜等抽送的介質與泵的運動部件、工件介質完全隔開,所輸送的介質不會向外泄漏。所以抽送有毒、易揮發或腐蝕性介質時,不會造成環境污染和危害人身安全。

 

進口隔膜泵 應用市場:

1、食品加工/生物衛生/制藥

2、汽車/電鍍和拋光

3、陶瓷/涂料/釉料

4、化學/石油

5、化工建筑/公共設施

6、機械配套/廢水處理

 

進口隔膜泵 應范圍:

●油井鉆好后,用氣動隔膜泵吸沉積物及灌漿。

●吸各種乳劑和填料。

●吸各種污水。

●各種強酸、強堿、強腐蝕液體。

●吸各種高溫液體可耐150度。

●可以吸花生醬、泡菜、土豆泥、小紅腸、果醬蘋果漿、巧克力等。

●礦井、坑道、隧道、選礦、礦渣中的積水。泵吸水泥灌漿及灰漿。

●不銹鋼隔膜泵泵吸各種橡膠漿。

●不銹鋼氣動隔膜泵可以吸各種磨料、腐蝕劑、石油及泥漿、清洗油垢及一般容器。

●可以吸各種劇毒、易燃、易揮發液體。

●不銹鋼氣動隔膜泵可以用于吸油漆、樹膠、顏料。

●不銹鋼氣動隔膜泵作為各種固液體分離設備的前級送壓裝置。

●氣動隔膜泵可以用于為油輪,駁船清倉吸取倉內污水。

●吸啤酒花及發酵粉稀漿、糖漿、糖密。

●粘合劑和膠水、全部種類可用泵吸取。

●各種瓦、瓷、磚器及陶器釉漿。

The scope of imported diaphragm pump is as follows:
After drilling well, use pneumatic diaphragm pump to suck sediment and grouting.
Absorb all kinds of emulsions and fillers.
Absorb all kinds of sewage.
Various strong acid, alkali and corrosive liquids.
It can absorb all kinds of high temperature liquid and can withstand 150 degrees.
Can suck peanut butter, pickles, mashed potatoes, small red sausage, jam apple pulp, chocolate, etc.
Water accumulation in mines, tunnels, mineral processing and slag. Pumping cement grouting and mortar.
Stainless steel diaphragm pump can pump all kinds of rubber slurry.
The stainless steel pneumatic diaphragm pump can absorb all kinds of abrasives, corrosive agents, oil and mud, clean oil dirt and general containers.
It is highly toxic and volatile.
Stainless steel pneumatic diaphragm pump can be used to absorb paint, gum and pigment.
Stainless steel pneumatic diaphragm pump is used as the front pressure delivery device of various solid-liquid separation equipment.
The pneumatic diaphragm pump can be used to clean the oil tanker and barge and absorb the sewage in the warehouse.
Sucking hops and fermented powder slurry, syrup and sugar density.
All kinds of adhesives and glues can be pumped.
All kinds of tile, porcelain, brick and ceramic glaze.
 

進口隔膜泵 注意事項:

1、正確選用隔膜

隔膜泵的主要部件是隔膜.正確選用隔膜可以達到事半功倍的目的,用戶訂貨時須注明輸送介質的性質,以便出廠時配備不同隔膜,一般隔膜有下列幾種:

1.丁晴隔膜;主要用于耐油場合。

2.氯丁橡膠5031#本單位特制,主要用于耐丙酮及各種酸類、堿類。

3.氟橡膠6021#本單位特制,主要用于高溫150℃:,耐甲笨耐腐蝕。但價格比其它隔膜高。

4.食品橡膠,專用于食品飲料的輸送。

2、注意事項

1. 隔膜泵出口嚴禁安裝閥門,如必需裝閥門;要在出口安裝安全閥門,工作壓力不得超過4公斤,以免造成損失。

2.應及時加油,保持潤滑系統正常運轉。

3.隔膜泵在使用中環境溫度應小于40℃、電機溫度不得超過75℃。

4.被輸送的介質及其溫度應在泵材允許范圍內。

5.對于輸送液體為易沉淀結晶的介質時,使用后應及時清洗排凈隔膜泵內積物,以免再開時損壞。

Precautions for imported diaphragm pump:
1. Proper selection of diaphragm
The main component of diaphragm pump is diaphragm. The purpose of getting twice the result with half the effort can be achieved by selecting the diaphragm correctly. When ordering, the user must indicate the nature of the conveying medium, so that different diaphragms can be equipped when leaving the factory. The general diaphragms are as follows:
1. Dingqing diaphragm; mainly used in oil resistant occasions.
2. Chloroprene rubber is specially made by our company. It is mainly used for resisting acetone, various acids and bases.
3. Fluororubber 6021 ? specially made by our company, it is mainly used for high temperature 150 ℃, resistance to methyl benzene and corrosion. But the price is higher than others.
4. Food rubber, specially used for the transportation of food and beverage.
2. Precautions
1. It is strictly forbidden to install valve at the outlet of diaphragm pump, if necessary, install safety valve at the outlet, and the working pressure shall not exceed 4kg, so as to avoid losses.
2. Add oil in time to keep the lubrication system running normally.
3. The ambient temperature of diaphragm pump in use should be less than 40 ℃, and the motor temperature should not exceed 75 ℃.
4. The transported medium and its temperature shall be within the allowable range of pump material.
5. When the conveying liquid is the medium that is easy to precipitate and crystallize, it is necessary to clean and drain the accumulation in the diaphragm pump in time after use, so as to avoid damage during re opening.
 

進口隔膜泵售后服務承諾:

1、服務宗旨:快速、果斷、準確、周到、徹底。

2、服務目標:服務質量贏得客戶滿意。

3、服務效率:保修期內或保修期外如設備出現故障,供方在接到通知后,如需現場解決的,派出專業技術服務人員,24小時內趕到現場(路途遙遠的48小時趕到),并做到問題不解決服務人員不撤離。

4、服務原則:產品保修期為十二個月,在保修期內供方將免費維修和更換屬質量原因造成的零部件損壞。保質期外零部件的損壞,德國洛克公司本著長期與客戶合作關系,提供的配件只收成本費,如需方人為因素造成的設備損壞,供方維修或提供的配件均按成本計價。

5、感謝您訪問我公司的網站〖〗,如有任何疑問.

您可以致電給我們 》我們一定會盡心盡力為您提供優質的服務!

聯系方式
公司名稱 萊恩泵閥制造(珠海)有限公司
聯系賣家 葉工 (QQ:1372169544)
電話 㠖㠔㠓㠛-㠚㠔㠒㠚㠓㠛㠔
手機 㠗㠙㠚㠒㠕㠗㠚㠓㠘㠚㠓
傳真 㠖㠔㠓㠛-㠚㠔㠒㠚㠖㠖㠛
網址 http://www.famen888.com
地址 廣東省珠海市