污网站在线观看视频,久视频久免费视频久免费,国产福利在线免费观看,一区二区三区乱码在线 | 中文

進口脈沖除塵電磁閥德國洛克品牌質量?jī)?yōu)異

進口脈沖除塵電磁閥產品參數：

公稱通徑：DN15～80mm

原理結構：分步導向膜片式

環境溫度：-10～+50℃ -40～+80℃

線圈溫度：<+50℃、<+85℃

控制方式：常閉、常開

公稱壓力：0.1～1.0Mpa

功率噴吹150萬次以上

電壓偏差允許波動 ±10%

閥體材質：鋁合金、不銹鋼

適用介質：空氣

介質溫度：-40℃～+120℃

介質粘度：小于50CSt （大于50時需定制）

防護性能：防水、防塵、防爆（Exd IICT5）、防腐

閥芯材質：均為不銹鋼

接線方式：接線座式、引線式、插頭式

電源電壓：

DC12、DC24V、DC36V、DC110V、DC127V、DC220V、DC380V；

AC24V、AC36、AC110V、AC127V、AC220V、AC380V

連接方式：螺紋、法蘭

泄 漏 量：零泄漏

備    注：特殊型可定制

進口脈沖除塵電磁閥產品特點：

1、設計更合理的結構，閥芯伸展自如，金屬活塞與閥腔不產生直接摩擦，運行更加可靠壽命長。

2、合理的密封材料和結構，密封性能更好，長期停用后的重新啟動、動作靈敏照舊，不會被介質中的雜質卡死兒導致活塞或活動。

3、進口脈沖除塵電磁閥采用德國洛克專用線圈，線圈不易燒毀，與電磁線圈接頭集成，更簡便緊湊的節能方案，減少電磁閥線圈的發熱溫度，提高電磁閥的開啟可靠性。

進口脈沖除塵電磁閥產品簡介：

德國洛克《DE LOCKE》進口脈沖除塵電磁閥專為除塵設備的應用而設計，具有高流量、長壽命、瞬間開關的閥門，由電磁先導控制其開通和關閉，由于先進的設計，使脈沖除塵電磁閥具有良好的流體性，采用丁晴橡膠膜片，故而具有壓力損失低，保證了電磁脈沖閥得到脈沖電信號時快速開啟和完成脈沖后的迅速關閉。廣泛應用于制藥廠、造紙廠、木工廠、飼肥料廠、染料廠、除塵器及石油化工等行業，是布袋除塵、吹灰系統的合適產品。直角先導膜片式防護性好，噴吹量大，設計緊湊，外觀精美動作響應迅速，高頻率工藝，品質可靠。

Brief introduction of imported pulse dedusting solenoid valve:
German Locke's de Locke "imported pulse dust removal solenoid valve is specially designed for the application of dust removal equipment, with high flow, long life, instantaneous switch valve, which is controlled by the electromagnetic pilot to open and close. Due to the advanced design, the pulse dust removal solenoid valve has good fluidity, and uses NBR diaphragm, so it has low pressure loss, which ensures that the electromagnetic pulse valve can get pulse electrical signal When the pulse is finished, it can be turned on and off quickly. It is widely used in pharmaceutical factory, paper mill, woodworking factory, feed fertilizer factory, dye factory, dust collector and petrochemical industry. It is a suitable product for bag dust removal and soot blowing system. Right angle pilot diaphragm type has good protection, large injection volume, compact design, beautiful appearance, quick response, high frequency process and reliable quality.
 

進口脈沖除塵電磁閥工作原理：

進口脈沖除塵電磁閥通過導線將電磁閥體內線圈輸入正向脈沖信號，線圈產生的工作磁通，使電磁閥動芯吸合，打開閥門。當停止正向脈沖信號輸入時，動芯釋放，動芯在彈簧力的作用下回復到初始狀態，關閉閥門；另外有自保持型的，停止輸入正向脈沖或斷電后也能保持，需要輸入負向脈沖信號才能復位；脈沖電磁閥的工作原理，是利用電器的脈沖轉化為機械的脈動，使得脈動氣體的強大能量變成動量，在短時間內釋放產生巨大沖力，用plc控制其脈沖的間隔應根據額定氣體壓力恢復時間來確定。

Working principle of imported pulse dust removal solenoid valve:
The imported pulse dust removal solenoid valve inputs the positive pulse signal to the coil in the solenoid valve body through the wire, and the working magnetic flux generated by the coil makes the moving core of the solenoid valve pull in and open the valve. When the positive pulse signal input is stopped, the moving core is released, the moving core returns to the initial state under the action of spring force, and the valve is closed; in addition, the self holding type can be maintained even after the positive pulse input is stopped or the power is cut off, and the negative pulse signal can be input to reset; the working principle of the pulse electromagnetic valve is to use the electrical pulse to convert into mechanical pulse, so as to make the pulsating gas The pulse interval controlled by PLC should be determined according to the recovery time of rated gas pressure.